Repair of your product , any brand, is no problem with the skilled people we have, 
gimage004.gif
and the suppliers who support us.
Our experience is in the preparation of economic proposals
Save time and money call us, some proposals 
are obvious, because of our experience. 
 Replacement  gearboxes are available from
 many suppliers, we propose the most suitable ones for you. 
We  help with guaranteed proposals for New Applications 
By asking relevant questions about your application, applying our knowledge and 
experience, and making guaranteed proposal. 
In a  Breakdown  situation we can provide experienced tradesmen to repair your 
equipment, and if required commission it to ensure the root cause of failure is taken 
care of.
 
 
Proposals
Our policy: at least two proposals
Our policy is to give you at least two proposals with relative advantages of  replacement 
products, or the product repair if applicable.
Completion dates, and times, are fundamental for you to decide the economics.
 
Over the phone proposals are only possible in certain cases, however it will always 
shed a certain light on the problem
Otherwise a check and report will be needed
 
We will give a Free 15 minute check and report within the workshop. 
Otherwise an agreed charge will apply 
 
 gimage004.gif                    gimage004.gif
 
Typical work              Extraordinary Work
 
 
Typical Work
gimage005.jpgWorm and wheel Gearboxes. Leaking oil. Disassembly , clean and check 
all parts  fit new seals and bearings . Assembly and test. Workmanship 
and materials Guaranteed  for 12 months 
 
 
 
 Typical Work gimage007.jpg
Bevel drive gearbox ran out of oil, special part of machine, New gearbox 
not available , quoted customer for new gears to be made. Made new gears, 
fitted new bearings and oil seals. Marked the gears after assembly to check 
mating Filled with synthetic oil, which handles the extreme pressures, and 
temperatures of overload better than conventional oils. 
Guaranteed for 12 months . 
 
top
 
Extra Ordinary work
gimage009.jpg
37 kW 3 rpm  hopper tipping gearbox Remove from site , 5 m in the 
air. Disassembly, clean and check all parts. 
Source and fit new bearings, and oil seals
Assembly and test no load. Fill with conventional lubricant
Guaranteed for 12 months
 
 
Extra Ordinary work
gimage011.jpg
5.5 kW 2 rpm Gearbox run out of Oil, Disassembly, 
clean and check all parts, Have new final drive gear machined 
Fit new bearings and seals, assembly, Blue test gears for mating, 
fill with correct lubricant, and test
 
 
Extraordinary Work
image013.png
0.75 kW 2 rpm  3 phase (has three slip rings  to be able to rotate the 
motor) drum rolling motor, used in a cardboard cutting machine to set up 
rolling drum dies. Disassembly, clean and check all parts. Repair brake 
mechanism within the motor, Fit new bearings and seals. Skim and polish
 the sliprings. Supply new carbon Brushes.
 
 
Extraordinary Work
image015.png
0.25 kW 14 rpm DC permanent magnet motor 
Lacks the power to drive, found motor was overloaded, and overheated, lost oil, and
 lost some magnetism .
Clean up all parts, fit new bearings, and oil seals
Fill with synthetic oil, charge the magnets. Assemble and test.